Refinishing furniture is messy and odorous, no two ways about it. But the rewards can be many. The look of wood coming into a new life, maybe taking on a totally different look even.
The chair I had mentioned previously is one that in some ways has gone very smoothly and in others has been challenging. The biggest challenge has been dealing with all the staples in it. It is an Ethan Allen chair I came across at Goodwill for $7.00, therefor the quality is high.
The products used are shown here along with other items you will be using. I also picked up some cheap toothbrushes which really come in handy for crevices. The container you use to pour the product into should be nonporous, a tin can works well.
Two of the products I tried, whereas they worked okay, they were slower at the actual removing of the finish (which I believe to be 2-3 coats of varnish). Only one of them, the Jasco Premium Paint & Epoxy Remover, actually made the finish bubble up, which in the past was the sign of a great wood stripper. The other one, the 2 Minute Remover, worked about the same without the bubbling. They both had strong odors.
Here is a peak at how the wood looked once stripped. I hope to have the chair completed this week and Reveal it in next week’s post.
Maybe here would be a good place to insert the setup of such a project. Number one is have plenty of ventilation. Make sure the flooring of wherever you are working is covered well with some very protective tarps or papers.
Ideally you will have your own space set up for this task. Unfortunately with my physical condition being what it is I wasn’t able to carry the chair to my workroom.
My #1 product choice is ……….Klean Strip Klean Kutter Refinisher!
It surprised me really. It is more runny whereas the others were more gel like. The others you brush on, let sit a few minutes, then remove. My choice to remove the finish is steel wool and then old tshirts.
The Klean Strip, however, you apply with the steel wool and start rubbing. It didn’t need a lot of pressure either. I dipped the end of a steel wool pad in the solution being careful of the dripping, I wiped the wood once with the grain, and when I went to wipe again the finish came right off. I was thrilled! So the one I thought I would like the least, actually turned out to be my favorite.
With this project I got a reminder of how much I always enjoyed stripping furniture. Not because of the process by any means, but because of the results. Makes me think of 2 pieces that have been sitting around maybe needing to be refreshed.
It looks to be another good week here in Illinois. Maybe some rain but more badly needed sunshine as well.
Enjoy the day!
Simply Scroll for more posts!