This table I had gotten years ago at Crate and Barrel outlet. Have always loved the charm of it, but it still didn’t seem to quite fit in. Now, after all this time, and a little paint, it feels right at home.
It is not unusual for me to take my sweet time when it comes to making decisions for my own home. Working with clients and guiding them through decision making comes easy for me. Actually, over the years I have heard this numerous times from interior designers. Maybe it’s just because there are so many good ideas to choose from!
After a good cleaning and sanding, I applied one coat of a latex primer (Kilz) and 2 coats of an interior latex paint. (I used Pittsburgh Paints and it is an off white called Milk Paint). I sanded in between coats but I still had brush marks remaining. Right or wrong, this has never bothered me, I like the way glazes work with them.
Once the wax has had a chance to dry, I give it at least an hour (it should lose it’s sheen), it gets buffed. I have found the best material for buffing is old tshirts. Ordinarily I prefer to buff in a circular motion, however, the Anne Sloan wax is a bit softer and I found rubbing with the grain works best with it.
The top I gave an extra coat of clear wax and buffed again. This helps protect the surface all the more. Also what I have found is that it moves the glaze a little bit and therefore you can even it out a little more where needed. Let it dry and buff again. And you’re done!
A little word of caution here: if you notice in the picture I have the floor taped off around the legs and sheets of white paper pulled through them in lieu of drop cloths. I advise only doing it this way if you have alot of painting experience and you are a clean painter. I wasn’t able to lift the table, therefore I approached it this way. Ideally? Lift the legs onto pieces of 2x4s that are sitting on top of a large dropcloth.
Once the paint has thoroughly dried I applied a wax glaze mix. This is the same paint and wax glaze mix that I used on the chairs.